[Mikhail]

Hello Christian,
Right. When you configure device in Communicator, don’t forget to set tag codes.

[Mikhail]

Use the step by step installation instructions. If you have an error on some step, share a screenshot.

[Mikhail]

I can check the screenshot if you make the link public.

[Mikhail]

To communicate with a Modbus device you need a Modbus driver that is included in Rapid SCADA by default. While Modbus Slave driver is used in special rare cases.

[Mikhail]

To activate Chart Pro you should use a way described in the manual. In case of application errors, check application log files.

[Mikhail]

Computer code can be found in the communication line log on Communicator start after you configure the driver and upload the project.

[Mikhail]

Enter an IP address into the Call Number field, and Modbus ID into the Address field.

[Mikhail]

Please provide a screenshot of the error.

[Mikhail]

You should publish a plugin project to a folder using Visual Studio.
Then download the plugin executables to check which files are needed.
Copy your files into the Web app installation directory.

[Mikhail]

Check this topic.

[Mikhail]

Channel is similar to a variable that stores a tag value.
Use this article as a step by step guide to configure polling of a Modbus device.

[Mikhail]

To display only current data, use scheme views and dashboards.

[Mikhail]

A reports take data from a historical archive. This demo demonstrates how reports work.
Modules are installed according to their manuals.

[Mikhail]

Duplicated

[Mikhail]

First of all, you should configure the Modbus template for the device to be able to poll the device.
Related question.

[Author]

Posts