[Mikhail]

Hello,
Communicator 6 can work either as OPC UA client and server.
OPC DA client is available, OPC DA server not supported.

[Mikhail]

In general, yes.
According to C/C++/C# syntax, the equality operator is ==
Also you can check channel status, for example, Stat(1) > 0

[Mikhail]

Hello Paulius,

You should create additional channel of the Calculated type to calculate a condition. Then use that channel in the trigger.

[Mikhail]

Hi,

According to the condition, the animated GIF can be changed to another image by Dynamic Picture component. But the stop frame will not be restored.

• This reply was modified 2 years, 10 months ago by Mikhail.

[Mikhail]

According to the history that versions belong to Rapid SCADA earlier than 5.5.1 (March 16, 2018).

How many channels and devices in the project?

[Mikhail]

Hi,
Try the Unicode sting data type instead of ASCII.

[Mikhail]

Hi,
The images are stored in a scheme file. They are not loaded from some directory.
There is no a component to display a sequence of images. A possible method is using animated GIFs.

[Mikhail]

What application has a version 5.0.3.0?

[Mikhail]

Hello,

This manual may help.

Can I find the old program version I used so far somewhere that I can at least restore the old state on the new server?

The oldest version that can be downloaded is 5.8.4.
You could simply copy C:\SCADA folder to a new server and register services as described in manual installation article.

[Mikhail]

Hi,
Please check this page for information about transfer licenses.

[Mikhail]

Setting channel value doesn’t cause sending a command. Therefore the module is needed.

[Mikhail]

🙂

[Mikhail]

Hi,

You could try creating animated GIFs and using them inside Dynamic Picture components.

[Mikhail]

Hi,

The above links don’t work.

[Mikhail]

Thank you for the info.
Decimal is a data type in C#. I suggest using another variable name.

[Author]

Posts