kcks66's Replies | Rapid SCADA Forum

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 181 total)

← 1 2 3 4 … 11 12 13 →

Author

Posts
July 8, 2024 at 6:34 am in reply to: Elastic report different default DateTime format for Excel #14906

kcks66
Participant

Hi Mikhail,

Can I change from short date and time to long date and time in Elastic Report?

July 8, 2024 at 6:32 am in reply to: Elastic report different default DateTime format for Excel #14905

kcks66
Participant

Hi JurasskPark,

I can choose as below:

https://ibb.co/FJTsfkb

July 4, 2024 at 1:25 pm in reply to: Elastic report different default DateTime format for Excel #14885

kcks66
Participant

Hi Mikhail,

I change the culture from original en-GB to many such as en-US, en-SG, en-MY, etc. Somehow I can get is [7/2/2024 10:00:00 AM]. I still couldn’t get [Tue, 2 Jul 2024 10:00:00 AM].

If I manually change the DateTime inside Excel Format Cell by using custom code [ddd, d mmm yyyy hh:mm:ss AM/PM], it worked.

Pls advice for can I use something like [ddd, d mmm yyyy hh:mm:ss AM/PM] into Rapid SCADA Administrator application to make it happen?

Thank you.

July 4, 2024 at 3:13 am in reply to: Elastic report different default DateTime format for Excel #14873

kcks66
Participant

Hi Mikhail,

Pls advice for which file or location contain the culture or locale setting?
Thank you.

June 13, 2024 at 11:41 am in reply to: Historical data report achieve copy #14691

kcks66
Participant

Hi Mikhail,

Got it.

https://ibb.co/Ms5qvdb

Thank you.

June 12, 2024 at 1:09 pm in reply to: Historical data report achieve copy #14672

kcks66
Participant

Hi Mikhail,

Do you mean delete those highlighted in yellow color?

https://ibb.co/RPyDNm9

May 10, 2024 at 11:40 am in reply to: How to extract MQTT message completely #14512

kcks66
Participant

Hi Mikhail,

My final setting, with many other parameters:

https://ibb.co/Wsr8HW3

May 10, 2024 at 11:32 am in reply to: RapidGate #14511

kcks66
Participant

Hi Mikhail,

Got it. Thx.

May 9, 2024 at 11:35 am in reply to: How to extract MQTT message completely #14506

kcks66
Participant

Hi Mikhail,

That’s great. I can read all the Voltage L1, L2 and L3 now.
Thank you.

May 8, 2024 at 8:53 am in reply to: RapidGate #14505

kcks66
Participant

Hi Mikhail,

I have no idea how to count slices. I screen shot as below:

https://ibb.co/vDbQd6t

So far around 850 days.

May 7, 2024 at 1:46 pm in reply to: How to extract MQTT message completely #14501

kcks66
Participant

I try like this but no luck

https://ibb.co/BjrrfFc

May 7, 2024 at 1:23 pm in reply to: How to extract MQTT message completely #14500

kcks66
Participant

Hi Mikhail,

Could you give example of how to write in subitems for my case?

May 7, 2024 at 1:11 pm in reply to: RapidGate #14499

kcks66
Participant

Hi Mikhail,

I have 2688 channels.

May 7, 2024 at 4:52 am in reply to: RapidGate #14494

kcks66
Participant

Hi Mikhail,

So far I had converting historical data from 01/01/2022 to up to date. One thing I noticed id historical data stored in PostgreSql database consumed very high storage size (350GB) compared to its DAT files (55GB)

PostgreSql database size:
https://ibb.co/93vtwPy

DAT files size:
https://ibb.co/8dMxV05

Is this normal?
Thank you.

April 21, 2024 at 12:03 pm in reply to: RapidGate #14451

kcks66
Participant

Hi Mikhail,

After I several test and retest, I found out data lost is due to weak wifi signal from PC with RapidGate. I move the PC next to router and use LAN cable instead of wifi, problem solved.

As for why calculated channels always 0 is due to I enable the formula with 0. I disable the formula and problem solved.

Looks like the “converting DAT files to PostgreSql database” is success. Right now I just need to keep perform the uploading command and wait patiently until all done.

Thanks you for the support.
Author

Posts

Viewing 15 posts - 31 through 45 (of 181 total)

← 1 2 3 4 … 11 12 13 →