[Mikhail]

If not, please email the computer code.

[Mikhail]

The only issue I can see is that the registration key for PlgMap is not correct.
If you get new temporary key, apply it, and upload the project, does the new key work?

[Mikhail]

Hi,
Now you can setup a channel to show a command dialog that contains several buttons with command values.
In the next generation of mimics, it will be possible to do like that https://ibb.co/rR1mWn2H

[Mikhail]

Hi,
Make sure that the channel 101 is of the calculated type.
Change SetVal to SetData(101, CmdVal, 1)

[Mikhail]

Hi,
Use relative path as shown in the example: ../../custom/MyPage.html
No C:\…

[Mikhail]

Hi,
Could you make screenshots from Rapid SCADA and another OPC client?

[Mikhail]

Hi,
It’s needed to create a function, e.g.

public double MyFunc()
{
  SetVal(101, CmdVal); // set value of channel 101
  return CmdVal; // return command value
}

And specify MyFunc() in the output formula of the channel that is used to send commands.

Note: not tested.

[Mikhail]

Hi,
Try creating a channel of the Calculated/output type having an output formula SetData()
It should help to change channel value according to user input.

[Mikhail]

You could try setting the view type explicitly in the Views table. Weird.

[Mikhail]

Hello,
The above link does not work. Could you fix it?

[Mikhail]

Hi,
Could you make a screenshot of the Views table?

[Mikhail]

Hi,
It’s simple.
Set the output formula to SetData()
Channel type is calculated/output.

[Mikhail]

🙂

[Mikhail]

Hi,
Could you describe your task more common? Do you need a channel that is changed manually?

[Mikhail]

Hi,
Led and toggle reflect an input channel. Your command should cause a change of an input channel to display its value.

[Author]

Posts