Telegram driver not activating

Tagged: telegram driver not working

This topic has 5 replies, 2 voices, and was last updated 5 years, 7 months ago by Mikhail.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
February 7, 2018 at 4:40 pm #3143

rambo
Participant

Hello I have put the required driver at C:\SCADA\ScadaComm\KP but at communicator properties are not getting activated… where to put the key??

February 8, 2018 at 11:45 am #3145

Mikhail
Moderator

Hello,
Provide screenshots, please.

February 14, 2018 at 2:50 am #3158

rambo
Participant

MQTT—>https://ibb.co/mW1Kan

Rgate—>https://ibb.co/mmy487

Tekegram—-> https://ibb.co/hiqZ87

February 14, 2018 at 8:05 am #3161

Mikhail
Moderator

Add new device of Telegram type like written in the manual. Then open device properties in Communicator

February 15, 2018 at 6:36 am #3167

rambo
Participant

Ok What about MQTT and R gate … where to enter the Licence key

February 15, 2018 at 9:12 am #3168

Mikhail
Moderator

MQTT driver is free. Rapid Gate registration described here http://doc.rapidscada.net/content/en/modules/mod-rapid-gate.html
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.