Forum Replies Created
-
Posts
-
how do I configure Linux to be static ip addresses?
Probably, this question is not related to Rapid SCADA configuring.
Hello,
how to display the IP address of each network port of the device in the rapidScada View?
Put a static text label on a scheme, for example. You cannot access device properties from a view.
How can I write the time data to the Linux system in View and set the time?
Create a channel of the calculate type. Use
Now()as an input formula of the channel. Choose proper channel format.Hello,
Try Automatic Control Module for sending commands.Elastic Report manual is here.
Please use this subforum if you write in Chinese.
First of all, you need to receive data correctly. Could you provide screenshots of the settings and received data?
Mikhail told me once that OPCUA input data goes directly to communicator devices (OPCDA servers in my example) without passing throuht RapidScada’s server Tags
Hello,
It may depend on the configuration. If you transfer data using Communicator’s data source, it comes directly. If you use Auto Control Module, data can be converted by formulas.There are no screenshots at the link. This conversation seems useless. I’m about to close the topic.
Elastic Report example is here.
It can be displayed as a web page view.
