Forum Replies Created
-
Posts
-
That was the solution. The older machine close to my area is not capable enough. I tried it in another area of the plant with non-vintage computers and it works just fine! Thank you!
I have a full view on my localhost computer if I open the web page up either as localhost or using its IP address. I can also log in on a remote computer using the Webstation host computer’s IP address. However, I see no data on the remote computer, as shown in the attached picture. This is sooo close to working properly, but I just can’t determine what I am doing wrong.
https://drive.google.com/file/d/1XqHNYqGkgXJOtcvXfnNa5XhyCqPQ-qTA/view?usp=drive_linkhttps://drive.google.com/file/d/1iplEw68bVb6PpOYLhEcmr5enVg6S1ygy/view?usp=drive_link
Webstation log shows it is operating with no errors.
http://192.168.100.136:10008/View/2
This brings up all of the correct information, but only when operating on the computer that I used the Administrator to create the page. I thought entering the same thing on another computer in our network would display the same page, but it just times out. Not sure what I am missing here.Can someone provide an example of what the deployment profile entries should look like? This link is what I get on the localhost, but I need to see the same thing on other computers on my network. So far, I can not do so. Help!!
https://drive.google.com/file/d/15dqgdjPO0_PZTfR1ag6jyaqeFMdEhh10/view?usp=sharingTo be more clear, I have the table displaying correctly on my computer as localhost, but I want to be able to access that data on another computer on our network. How, exactly, do I accomplish that?
Thanks for all of your assistance!
TimHow does one get out of development mode?
Error
An error occurred while processing your request.Request ID: 00-d4dbdafe56d595e18b77476580f13ca7-f5cbf00c2d9d81ea-00
Development ModeSwapping to the Development environment displays detailed information about the error that occurred.
The Development environment shouldn’t be enabled for deployed applications. It can result in displaying sensitive information from exceptions to end users. For local debugging, enable the Development environment by setting the ASPNETCORE_ENVIRONMENT environment variable to Development and restarting the app.
https://drive.google.com/file/d/1G-pJdFPRPB7Y2vkNxRIRs2SaLPjuBwhA/view?usp=sharing
Thank you, Mikhail !!
https://drive.google.com/file/d/1km8iqNL57Y7Rns3izCVLriHNxvOfEtLW/view?usp=sharing
I do get the data in the Communicator. However, I am not able to get the data to be visible on a web page. I can send a command from the table page and see in the Webserver log that it was processed, but still no current data in the table. I am missing a step somewhere.
Thanks!
Tim
https://drive.google.com/file/d/1gbGi_NFAO-WD2ypQfW9NTFJpw3NwGEOZ/view?usp=drive_linkStill does not update the values. I know I am probably missing some minor setting, but I just don’t know what it is.
Thanks,
TimIt lets me go to the login page now, but I get an error message that I don’t understand.
https://drive.google.com/file/d/1m1-pd8TQcE8mxGwVp_zs6kOizoJLOHbz/view?usp=sharing
