Rapid Scada visible on WAN

Forum Home Forums Uncategorized Issues Rapid Scada visible on WAN

Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #9494
    tcpipchip
    Participant

    https://blinky-nina-w102.blogspot.com/2021/09/u-blox-nina-w106-visuino-rapid-scada.html?m=1

    Enjoy

    If you have questions

    tcpipchip@hotmail.com

    • This topic was modified 8 months, 3 weeks ago by Mikhail.
    #9501
    Mikhail
    Moderator

    Hello,

    Could you describe what it is?

    #9502
    tcpipchip
    Participant

    Hi
    The blog teaches how to allow
    the RAPID SCADA web server be accessed from WAN in somewhere of world!

    Miguel

    • This reply was modified 8 months, 3 weeks ago by tcpipchip.
    #9504
    tcpipchip
    Participant

    Web translator can help
    http://itools.com/tool/google-translate-web-page-translator

    • This reply was modified 8 months, 3 weeks ago by tcpipchip.
    #9506
    tcpipchip
    Participant

    The purpose of this BLOG is to demonstrate how it is possible to use VISUINO to program the U-BLOX NINA W106 module to be accessed via MODBUS TCP, that is, turning it into a MODBUS server. The EVK-NINA-W was used for the tests and only readings were performed (READ INPUT REGISTER and COIL), as well as COIL writing, connected to a W106 GPIO, through the RAPID SCADA software. RAPID SCADA has the option of being accessed via the WEB, so it will be shared to be accessed from anywhere in the world via DESKTOP REMOT3.IT.

    • This reply was modified 8 months, 3 weeks ago by tcpipchip.
    #9508
    Mikhail
    Moderator

    Interesting! Thank you.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.