- This topic has 1 reply, 2 voices, and was last updated 4 months, 2 weeks ago by
.
-
Posts
-
DrvMOXANportJP v6.4.0.2
GitHub
https://github.com/JurasskPark/RapidScada_v6/tree/master/SharewareDrivers/Drivers/MOXANportJPDriver
https://github.com/JurasskPark/RapidScada_v6/releases?q=DrvMOXANportJP&expanded=trueMOXA NPort JP — Rapid SCADA driver for monitoring and administering MOXA network converters NPort.
This project is designed specifically for the MOXA NPort. The logic is separate from the MOXA MGate because the NPort and MGate command sets differ.
Attention! Depending on the model and firmware, some data may not be received.For example, the 5410 and 5250 models receive device uptime information, but not the 6250 and later.
The main purpose and concept of the driver is to check the TX and RX packet counters. If the counters don’t change within the set time, a crash flag is raised.
Additional options include mass saving of device configurations (those who have had more than 200 will understand), the ability to flash device firmware, and a classic reboot and device detection via a signal (beep).This driver is paid.
The cost for individuals is $75.
The cost for companies is $150.
- You must be logged in to reply to this topic.