An error

Forum Home › Forums › Communicating with Devices › Modbus › An error

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 19, 2022 at 6:25 am #10085
    Rich Ex
    Participant

    Hi All
    Came in this morning top see the RS was offline … the log showed

    2022-02-19 05:59:09 <D-TWMLOG-01><SYSTEM><ACT> Connect to client 127.0.0.1
    2022-02-19 05:59:09 <D-TWMLOG-01><SYSTEM><EXC> Error communicating with the client 127.0.0.1: Unable to write data to the transport connection: An established connection was aborted by the software in your host machine.

    This was repeated in the log many times .
    I had to reboot the PC to get things to work again .
    Any ideas what could have happened ?

    Many Thanks
    Rich

    February 21, 2022 at 6:20 am #10086
    Mikhail
    Moderator

    Hi,

    How devices are connected to Rapid SCADA? I’m asking about network interfaces, gates, etc. Also provide Communicator settings, please.

    March 17, 2022 at 6:53 am #10103
    gabeirinhas
    Participant

    Good morning

    A device randomly stops communicating with me.

    I recover connection by sending the restart line command.

    Is there any way to automate this process ? and not to do it manually.

    Any other suggestions.

    Thank you.

    March 17, 2022 at 12:05 pm #10104
    Mikhail
    Moderator

    Hello,
    Please provide screenshots of the communication line and device settings and communication line log that demonstrate the issue.
    What type of connection is used?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.