Intergration data input into cloud system

[Hakim A]

Hello there, so how am i going to solve the integration of rapid scada for the data input into the cloud system ? Is there any like a source code that i can use or anything?

• This topic was modified 7 years, 6 months ago by Mikhail.

[Mikhail]

Hi,
Cloud system is an abstract term. You can build your system based on Rapid SCADA or use other software and integrate it with Rapid SCADA. First of all, you should choose the architecture of the system.

[Hakim A]

Hi Mikhail,

Please understand that i am very new to all of these.
Here is my problem:
This project is to show if there is a leak in the pipeline. I have successfully display the minor leak and major leak scenario in the Rapid Scada scheme.

https://drive.google.com/drive/u/0/my-drive

https://drive.google.com/drive/u/0/my-drive

So right now how am i suppose to build the system based on Rapid Scada and how do i choose the architecture of the system? I am a little bit slow regarding all of these .

Please help me step by step.

Thank you for your response
Regards
Hakim

[Mikhail]

Hi Hakim,
Please provide correct links.

[Hakim A]

https://drive.google.com/open?id=1qKAWsxNKfTZUEpwutxzzqj9sXLpTLOtA

https://drive.google.com/open?id=1-p1Aqih74bthLzobyJuIWfX04ctJC2xc

[Mikhail]

Hi Hakim,
If you ask about displaying data on arrow indicators, currently it’s a bit tricky. Otherwise, clarify the question.
See the Manometer example https://rapidscada.org/download/image_pack/image_pack_1.0.zip

[manraj]

Hi

I would want to purchase the RAPID SCADA services.But before that I would want to how would you connect to the modbus.Do I require a server room or only just WIFI?.Do I need to configure any settings.

[Mikhail]

Hi,
You should use a device like Moxa Nport that initiates a connection with a cloud server by IP or DNS name. After connection is established, Rapid SCADA server polls the devices.

[Mikhail]

Also see
Moxa MGate
3grtack GS828

[manraj]

Hi there,

I would want to ask if there is any other cloud systems which is open source that RAPID SCADA can access to.Perhaps a suggestion on a few cloud monitoring sites that I can look into.Is there a way where arduino board can send data to a cloud server and use RAPID SCADA to monitor it?.

[Mikhail]

Hi,
Rapid SCADA can upload data to a database. If a 3rd party cloud system supports DB integration, you can use it.

Is there a way where arduino board can send data to a cloud server and use RAPID SCADA to monitor it?

Yes, you should add into Arduino sketch one of the supported protocols: https://rapidscada.org/product/connectivity-and-integration/
And deploy Rapid SCADA into a cloud.

[trauden]

Hi Mikhail,
Rapid SCADA can upload data to a database in clound bys this similar way.
Raspberry->NodeRed->Ubidots clound ?
http://help.ubidots.com/developer-guides/connect-node-red-with-ubidots

[Mikhail]

Hi,
Likely, an integration software module should be developed to complete this task.

[Author]

Posts