Webstation output channel error

Forum Home › Forums › Runtime Bugs › Webstation Bugs › Webstation output channel error

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 10, 2026 at 6:36 am #17935
    Joiceabraham
    Participant

    I am turning on and off a relay by giving ON or OFF, and 1 or 0 command from webstation. Webstation sends the command but the value in the current place shows error check below drive for details
    https://drive.google.com/drive/folders/1aNyHY6ZBdqGWuqzZEE7dyTnLf4d88jPG?usp=sharing

    May 10, 2026 at 8:59 am #17937
    manjey73
    Participant

    The format should be On-OFF. The error is probably related to the fact that you need to set the byte order correctly. Or set up the address start correctly from 0 or from 1.

    May 11, 2026 at 8:15 am #17940
    Mikhail
    Moderator

    Hello,

    For testing, you could set the format to an empty value. After you make it works, change the format to Off-On.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.