Forum Replies Created
-
Posts
-
Set the same signals for device 62 as the signals for device 61. It’s OK. The input channel numbers are different.
Hi,
Do you already have a Modbus device?
It’s not clear what your issues are. Can you specify the questions?
I recommend online training by Skype. It will save your time.Hello,
First off all, try http://localhost to make sure that the web server is running.
Then you can fix the issue by manually setting up the web application as written here http://doc.rapidscada.net/content/en/installation-and-run/manual-installation.html List items 3-6.
Hi Josef,
How much would it cost to purchase a development of the funkcions ?
I sent you an offer by email.
I mean that a command sender device and a receiver device must me within the same communication line in the Communicator settings. Otherwise it’s better to create server module DLL than a driver.
Hello,
Open command window on the other PC and type the command:
ping 192.168.1.101
Does the ping work?
This is not SCADA issue, but network issue.Also try http://192.168.1.101
Does it work?Make sure that TCP port 80 is opened for incoming connections by the server firewall.
Hi Josef,
You need to create appropriate functions in Formulas table, create input channels of calculated type which use these functions and then define the input channels for an dynamic picture components of the scheme.
Creating functions required programming skills. You can purchase the development of the functions or do it by yourself and ask me general questions about it.
Hi,
It’s not a problem.
See this answer https://github.com/RapidScada/scada/issues/38If you create a module for SCADA-Server, you can use PassCommand() method within the module.
If you create a driver for Communicator, you can use CommLineSvc.PassCmd() method to send command to a device that is bound to the same communication line.It’s true.
Kurlekar, if you need to speed up development of the required feature, you can be a sponsor of this feature.Hello,
If you choose the fore color “Status” for the dynamic text, its behavior becomes similar to table view.
