[Mikhail]

Hello,
What is written in ScadaServer.log?

[Mikhail]

Hello,
Did you copy that files when installed the plugin?

[Mikhail]

Hi,
Could you share the GIF that causes the error?

[Mikhail]

Hello,
Secret key of the client must match the secret key of the server. Copy the correct key from the Server settings.

[Mikhail]

Hello,
Sounds useful.
Unable to open the links. Could you upload images to https://imgbb.com/ or Google Drive?

[Mikhail]

🙂

[Mikhail]

Try 2301 order.
If it does not help, please post links to screenshots of the Modbus template.

[Mikhail]

You could try writing data to kepserverex by sending commands from Rapid SCADA.
Commands can be sent manually or automatically. To send commands automatically, try this module.
The described approach works for a small amount of tags.

[Mikhail]

They have different function code. So you need to select proper Data table in the Modbus template.

• This reply was modified 2 years, 7 months ago by Mikhail.

[Mikhail]

Hi,
Use https://rapidscada.net/modbus to parse the packets and find the difference.

[Mikhail]

Hello,
Communicator 6 can work either as OPC UA client and server.
OPC DA client is available, OPC DA server not supported.

[Mikhail]

In general, yes.
According to C/C++/C# syntax, the equality operator is ==
Also you can check channel status, for example, Stat(1) > 0

[Mikhail]

Hello Paulius,

You should create additional channel of the Calculated type to calculate a condition. Then use that channel in the trigger.

[Mikhail]

Hi,

According to the condition, the animated GIF can be changed to another image by Dynamic Picture component. But the stop frame will not be restored.

• This reply was modified 2 years, 7 months ago by Mikhail.

[Mikhail]

According to the history that versions belong to Rapid SCADA earlier than 5.5.1 (March 16, 2018).

How many channels and devices in the project?

[Author]

Posts