Sending email by using Gmail sudden fail

[hethongscada62]

Hello Victor,
Please follow the all steps that Mr. Mikhail gave in instructions. Means to create an email mailbox in Yandex, then set up the properties of the email device as follows
https://imgbb.su/image/xuFrpn
And setup an Address book as instruction.
Have a good result
Han Hoang

[hethongscada62]

Hi Victor,
Noted that you have to Check the settings:
https://ibb.co/hKd7VfT
The best regards
Han Hoang

[hethongscada62]

Dear Mr. Mikhail,
Sending email from directly from email device and via Auto control module have been tested on Windows. All they are working fine. But they are not work on RPi (Of course after installing Auto control plugin and configure a email driver) . So could you let me know: Which files (Auto control plugin and email driver) on Windows I have copy then past to RPi?
Thanks and best regards
Han Hoang

[Mikhail]

Hello,

Do you use Rapid SCADA 5 or 6?

[hethongscada62]

Dear Mr. Mikhail,
I am using a Rapid Scada 5.
Thanks
Han Hoang

[hethongscada62]

Dear Mr. Mikhail,
And there are versions of drivers those are using in my project:
KpEmail: version 5.0.1.1
Kptelegram: version 5.0.2.0
Communicator: version 5.2.1.0
Server: version 5.1
Thanks a lot
Han Hoang

[Mikhail]

Hello,

Copy the following files to RPi:
/opt/scada/ScadaServer/Mod/ModAutoControl.dll
/opt/scada/ScadaComm/KP/KpEmail.dll
/opt/scada/ScadaComm/KP/KpTelegram.dll

[hethongscada62]

Dear Mr. Mikhail,
Thank you for your reply.
I have done as you advised. There is strange, all both email and telegram drivers are working perfect on Windows but they can not work on RPi.
https://imgbb.su/image/xTz7FM
https://imgbb.su/image/xTzwyC
Some thing is wrong on RPi, but where is it?
Thanks a lot
Han Hoang

[hethongscada62]

Dear Mr. Mikhail,
Thank you for your reply.
I have done as you advised. There is strange, all both email and telegram drivers are working perfect on Windows but they can not work on RPi.
https://imgbb.su/image/xTz7FM
https://imgbb.su/image/xTzwyC
Some thing is wrong on RPi, but where is it?
Thanks a lot
Han Hoang

• This reply was modified 7 months, 3 weeks ago by hethongscada62.

[Mikhail]

Hello,
Looks like Mono version is too old.
Current Mono version is 6.12.0, link.

[Mikhail]

To check Mono version, run the command
mono --version

[hethongscada62]

Dear Mr. Mikhail,
The current Mono version is 6.12.0.122.
https://imgbb.su/image/xq0tHS
https://imgbb.su/image/xq0Vq6
I think the current version is not too old but I am trying to update to Mono version 6.12.0.182 but I can not update.
https://imgbb.su/image/xq0O16
Has a another method to update?
Thanks a lot
Han Hoang

[Mikhail]

Hello,
Mono 6.12.0.122 is up to date.
But in the screenshot https://imgbb.su/image/xTz7FM the error is in Mono.Security.dll 4.0.0.0. Could you search for Mono.Security.dll inside subdirectories of /opt/scada ?
If you found Mono.Security.dll there, delete it and restart the Rapid SCADA services.

[hethongscada62]

Dear Mr. Mikhail,
The mono.security.ddl was found and deleted. The KpEmail is working normal. The email is sending automatic perfectly, but KpTelegram has not executed.
https://imgbb.su/image/xL80O1
https://imgbb.su/image/xL8zNY
https://imgbb.su/image/xL8xuW
https://imgbb.su/image/xL8v0R
Maybe there is not new Mono.Security.ddl in KP folder.
I am finding online a new version of Mono.Security.ddl but i have not got a result.
Do you have new Mono.Security.ddl file?
Thanks and best regards
Han Hoang

[Mikhail]

Hello,
According to the provided line013.log, Telegram Driver requires a valid registration key.

[Author]

Posts