Modbus TCP or RTU Forum Home › Forums › Communicating with Devices › Modbus › Modbus TCP or RTU This topic contains 5 replies, has 2 voices, and was last updated by Mikhail 4 months, 2 weeks ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts February 28, 2019 at 12:21 pm #5087 battassiniParticipant Please I’m testing the Rapid Scada and I need to understand how to create a Mosbus TCP or RTU TAG and associate this TAG with a Button For example? Thanks. February 28, 2019 at 4:24 pm #5088 MikhailModerator Hi, Do step by step as written here and shown here. If something is not clear there, please ask particular questions. March 1, 2019 at 12:28 pm #5093 battassiniParticipant Dear. Thank you for your quick response. I have a problem. The Administrator is not opening when I run it? Not open? My windows 8.1. Thanks. March 1, 2019 at 2:56 pm #5096 MikhailModerator Hello, Please check this topic. March 4, 2019 at 11:59 am #5110 battassiniParticipant Please always I run application on the rapid Scada I have to execute all the steps of the video First RUN? And if I disconnect PC where it is running application and connect again I have to start everything manually? Thanks March 4, 2019 at 3:23 pm #5111 MikhailModerator And if I disconnect PC where it is running application and connect again I have to start everything manually? No. Actions shown in “First run” needed only for the first run. Rapid SCADA starts automatically after a computer starts. Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.