Device Recommendation? Forum Home › Forums › Communicating with Devices › Device Recommendation? Tagged: devices This topic contains 3 replies, has 2 voices, and was last updated by Mikhail 1 month, 1 week ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts October 8, 2019 at 3:49 pm #5994 serialenablerParticipant Hi, I am new here and trying to setup a demo of sorts of remotely controlling a lightbulb/camera or something similar on a remote network using this software. The lightbulb/camera would have to be connected to a device listening on an open port/IP as I can only go outbound from where RapidScada is deployed. Any suggestions on a good setup that is not too expensive to do? Thanks a bunch in advance! October 8, 2019 at 9:28 pm #5995 MikhailModerator Hi, Do you need to embed video stream in SCADA user interface, or cameras provide variables using some communication protocol, for example, SNMP? October 9, 2019 at 1:55 pm #5996 serialenablerParticipant Hi, thanks for responding! No, I don’t need it embedded but hopefully yeah some sort of on/off communication will be relayed back to the software. October 9, 2019 at 10:36 pm #5997 MikhailModerator Hi, If you need to switch ON/OFF something, you can choose ADAM-6060, for example. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.