svoicum

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • in reply to: Telegram bug #2777
    Avatar
    svoicum
    Participant

    Thank you!
    Awesome that you have fixed it!
    I am currently trying g to figure out how to configure the bot and send the notifications from the system…
    Do you have any good tutorial for reference?
    Thanks!

    in reply to: Telegram bug #2741
    Avatar
    svoicum
    Participant

    Hello,

    I have made a video describing the process. You can download it from here: https://we.tl/c3ph6ew5es

    in reply to: Telegram bug #2738
    Avatar
    svoicum
    Participant

    Hello,

    Sorry for the late response.

    But, after I restarted the PC several times the configurations dialog for Telegram device works.

    I don’t know why, but it simply does.

    Do you still want me to send you any data?

    in reply to: Image conditions value from other channel #2685
    Avatar
    svoicum
    Participant

    Nevermind.
    After a full restart of the computer, it now works!
    Thank you for your support!

    in reply to: Image conditions value from other channel #2683
    Avatar
    svoicum
    Participant

    Yes, it is exactly what I want to achieve.
    I have created an Input Channel on my device, that is configured as in the image:
    [img]http://savepic.net/10183185.htm[/img]
    Table definition:
    [img]http://savepic.net/10203667.htm[/img]
    Table view:
    [img]http://savepic.net/10193427.htm[/img]
    In my table, it shows —
    Should I do anything else?

    • This reply was modified 2 years, 3 months ago by Avatar svoicum.
    in reply to: Modbus TCP send floats #2649
    Avatar
    svoicum
    Participant

    Also, how do I create a control where I can enter the value of the new SetPoint for the output channel?

    in reply to: Modbus TCP send floats #2648
    Avatar
    svoicum
    Participant

    Hi Mikhail,
    Thank you for the fast response.
    I can wait a week. Will send you an email just shortly.
    But, I still don’t know how to define an output channel, to write into the registers. Should I add commands in the Device Template Editor? Like so?[img]http://savepic.net/10148875.htm[/img]
    And where can I find the formula table?

    in reply to: webstation Scheme loading failed. Try to reload scheme #2169
    Avatar
    svoicum
    Participant

    Hello!

    I was just able to try it.
    If I open Webstation from the internet it works. But now, it doesn’t work locally.
    This is a major issue, because it must be able to be viewed both from the internet and locally.

    Any possible quick fix?

    Thank you!

    in reply to: Event for alarm limits #2167
    Avatar
    svoicum
    Participant

    Thank you @mikhail!

    All is working fine.
    I don’t know what happened, but it works now. Previously when I ticked Write Events checkbox it didn’t write the events. Now, it is working.

    Now I have another problem with the WebStation, but I replied to a thread that was already created.

    All the best!

    in reply to: webstation Scheme loading failed. Try to reload scheme #2165
    Avatar
    svoicum
    Participant

    Hello @mikhail!
    I am facing with the same issue, but over Internet.
    My server is running on a Raspberry PI. If I connect using the local LAN IP everything works OK.
    But, if I connect from the internet (all port forwarding is OK), it loads the authentication screen, I can login just fine, but I get the same behavior as @sguerrero18.
    You can see the console here: http://imgur.com/a/2udL2
    Thanks in advance!

    • This reply was modified 2 years, 8 months ago by Avatar svoicum.
Viewing 10 posts - 1 through 10 (of 10 total)