Forum Replies Created
-
AuthorPosts
-
welschemeyerParticipant
Ok Thanks than we will wait for the new version.
The Translation is still in progress.
welschemeyerParticipantHello Mikhail,
are there any new information about the Scheme view on the Raspberry Pi?
I currently have some time to work and wanted me to be happy to deal with it. Among others I am also in a German translation of the program.
welschemeyerParticipantYes I was able to fix the error.
I have located the Raspberry again in English.What could possibly even in the manual inside, is an example of the calculation function, since I had hastily cleared your example and then had to look no further to find an example.
Oh sorry that was my mistake.
I always write only what I want to write in German and then again in English (which I have just forgotten about that)
———–
Ja die Fehler habe ich beheben können
Was auch noch evtl. in die Anleitung hinein könnte ist ein Beispiel der Berechnungsfunktion, da ich voreilig dein Beispiel gelöscht hatte und dann erstmal länger suchen musste um ein Beispiel zu finden.
welschemeyerParticipantSo..
Da bin Ich mal wieder hier ein paar Ideen um die Installation auf dem Raspberry zu vereinfachen.
Ich weiß mein Englisch ist nicht sehr gut aber, Ich gebe mein bestes.
Aktuell bin Ich dabei irgendwie eine Kommunikation auf Basis von libnodave.dll nachzubauen, damit man auch mit Siemens SPS kommunizieren kann.
Installation of Rapid SCADA on Raspberry Pi
——————————————-1. Copy all the files of Rapid SCADA Mono from scada folder to /etc/scada
over the UI with Root rights over Console:„sudo pcmanfm“
after copy set the Folderpermissions to PI / Pi ( right
click Preferences on folder scada)2. Copy the scripts from daemons folder to /etc/init.d
3. Grant full access to SCADA-Web log folder:
1. Install Rapid SCADA
2. Create and test the configuration using Windows
3. Copy to Raspberry Pi content of the following directories:
C:\SCADA\BaseDAT
C:\SCADA\Interface
C:\SCADA\ScadaComm\Config
C:\SCADA\ScadaServer\Config (Don’t overwrite ScadaServerSVCConf.xml !!!)
C:\SCADA\ScadaWeb\configwelschemeyerParticipantThat was the error …..
I’m From germany an we use a decimal separator ( , )
Then I will continue to test and hope that everything works out soon
welschemeyerParticipanthttps://www.dropbox.com/s/ityydfbcrzzidc9/Rapid%20Scada%20View.rar?dl=0
Here Is a quick an dirty windows forms Browser …. but popups will be opened in new Internet explorer windows
i will be looking for tabbed browsing on this way
welschemeyerParticipantWe use depending on the customer either Google Chrome in Kiosk mode:
http://www.think2loud.com/868-google-chrome-full-screen-kiosk-mode/
Or have a simple Windows Form application with a web control in Kiosk mode:
web control
https://msdn.microsoft.com/en-us/library/3s8ys666(v=vs.110).aspxFullscreen / Kiosk mode
http://stackoverflow.com/questions/505167/how-do-i-make-a-winforms-app-go-full-screenBut so far not been tested with Rapid scada, because we have problems with the installation Raspberry
welschemeyerParticipantThe easiest way would be to use a browser in kiosk mode.
So we do it for some customers.welschemeyerParticipantYes i use a new Installation of raspian jessie.
-
AuthorPosts