Forum Replies Created
-
AuthorPosts
-
MikhailModerator
Hi,
Please provide more information:
How the sensor is connected to RPi?
What communication protocol is supported by the sensor?
Do you use your own software deployed on RPi to get data from the sensor?MikhailModeratorHi,
Do you mean that you measure value by GPIO of RPi? In this case, you can use Raspberry Pi 3 Driver available at http://demo.rapidscada.net/plugins/Store/Store.aspxMikhailModeratorHi,
where to use this formula
Add the formula into the Formulas table. Then use it in the Foumula field of an input channel.
i have gone through Elastic Reports
Do you have questions?
MikhailModeratorIt is a good idea to implement event section of Elastic Report.
January 2, 2018 at 7:45 am in reply to: Comparing the previous value of channel with the current value of same channel #3002MikhailModeratorHi,
If you need to save a time when value is maximum, you need additional channel and more complex formula. Something like that:
double GetMax(int timeCnl) { if (Val() > Cnl) { return Val(); } else { SetVal(timeCnl, EncodeDate(DateTime.Now)); return Cnl; } }
You should read about Elastic Report: http://doc.rapidscada.net/content/en/modules/plg-elastic-report.html
The demo is here http://demo.rapidscada.net/plugins/ElasticReport/ElasticRep.aspx?reportID=101In case of questions about Elastic Report, create a new topic.
MikhailModeratorYou wrote “when adding it to the Server”.
But you should not add it to the Server. Please provide screenshots.MikhailModeratorKpTelegram.dll must be put into C:\SCADA\ScadaComm\KP
This is a library for Communicator.
Did you copy the DLL there?MikhailModeratorDo you mean that error is the same after unblock?
Please provide a screenshot.MikhailModeratorHi,
Elastic Report doesn’t work with events. It works with data archive.MikhailModeratorI had edit link but it disappeared after few minutes.
The forum engine works so.
MikhailModeratorHi,
If you download Rapid SCADA 5.5.0 before the 26 of December:
“There were 2 outdated files in the package: PlgScheme.dll, ScadaSchemeCommon.dll. The issue is now fixed. Download the distributive again and update these files.”
It was written here.If it doesn’t help, press F12 in browser and make a screenshot of errors in the Console tab.
I would like to merge and edit my post, is it possible?
Do you have the Edit link above your post?
December 29, 2017 at 7:19 am in reply to: "CreateDaSubscr()" method in "KpOpcLogic.cs" can't get value. #2983MikhailModeratorBy default the service works as system user. You can change a user in the properties of the service.
December 29, 2017 at 7:19 am in reply to: "CreateDaSubscr()" method in "KpOpcLogic.cs" can't get value. #2982MikhailModeratorHello,
The service and the GIU works as different Windows users with different privileges. You can check user names in Task Manager. This is important when use OPC.December 25, 2017 at 12:18 pm in reply to: Comparing the previous value of channel with the current value of same channel #2977 -
AuthorPosts