[kcks66]

Hi Mikhail,

Can login from other PC now.
Thank you.

[kcks66]

Hi Mikhail,

Noted. Thanks for the suggestion.

[kcks66]

Hi manjey73,

That’s great. Thank you.

[kcks66]

Hi Mikhail,

Noted. Will give it a try.

[kcks66]

Hi manjey73,

Currently I am waiting for an publish of instruction steps on how to migrate from V5 to V6. I will definitely want to use V6.

[kcks66]

Hi manjey73,

Yes. I managed to copy the input channel to the output channel by using data change trigger.

Now can I store a hexadecimal number in an input channel? I want to copy the hexadecimal number in an input channel to an output channel?

Thank you.

[kcks66]

Hi manjey73,

Ah, I think I didn’t ask the question properly. I wish the output channel send out value always follow input channel as the input channel value is always changed from 1 to 100.

[kcks66]

Hi manjey73,

Meantime, I tried to use automatic control module to perform quite similar task. My task is straight forward this round.

I want an output channel send out value follow an input channel value; as example input channel 1001 has 15, I want the output channel 2001 to send out 15 also.

I configured automatic control module as below but failed to get the result as I expected.

https://ibb.co/hDs0jLN

Pls advice and thank you.

[kcks66]

Hi manjey73,

Yes, me too. Always get 0.

By the way, thanks for your effort.

[kcks66]

Hi Mikhail,

It is multiple holding register. Example taken from the manual:

https://ibb.co/YXHsvvq

The register address to use is 0002 reference frequency:

https://ibb.co/KWmNJXW

[kcks66]

Hi Mikhail,

Pls advice for the decimal to hexadecimal conversion issues.

By the way, I have automatic control module installed, could it be used to do the job?

Thank you.

[kcks66]

Hi manjey73,

I am using V5.8.4. Look’s like the result is not the same in both V5 and V6.

Hi Mikhail,

I changed my output channel command type to Binary. That’s great there is no more error message.

However I entered 30 in web browser but the communicator device page show data is unable to be converted (0001 0000)

https://ibb.co/4pxxpQg

https://ibb.co/G7CXqvL

Pls advice and thank you.

• This reply was modified 1 year, 1 month ago by kcks66.

[kcks66]

Hi manjey73,

I entered 30 in web browser:

https://ibb.co/yfZv0Tn

But error message occur:

https://ibb.co/Dtx5cVZ

What have I missed out?

[kcks66]

Hi manjey73,

Next is my device template:

https://ibb.co/gvcV15y

Follow by my output channel:

https://ibb.co/PDzX6hh

[kcks66]

Hi manjey73,

| 31.07.2023 08:59:05 | Code=freq, Data=00010BB8 |

Enter 30 in Web.
Although no, it seems to be enough, I entered 30 into the Web and received the following data in the sent command.

YES, this is what I need.

I need to start from beginning step by step follow your instructions.

The formula below is correct?

public byte[] NewFreq()
{
byte[] freq = BitConverter.GetBytes((uint)Cmd*100);
return new byte[] {0x00, 0x01, freq[1], freq[0]};
}

[Author]

Posts