[rsepulve]

Thanks Mikhail,
I’ll try.

[rsepulve]

Hi Mikhaeil,
Sorry, I reffer to the communicator side looking to GSM RTU.
for example I have 2 RTUs.
One with Modbus RTU and other with Modbus TCP.
You talk about if the RTU start communication, don´t matter the remote IP addres, how I have to configure the channel setting type tcp cliente, tcp master, in properties, master, Slave, connection individual, shared, etc.
That is confused to me.
I´ve put in GSM RTU, the public address and TCP port 502.
In the router I´ve forwarded the 502 port to internal IP addres of Communicator and SCADA server.
I´ve looked in the ethernet port that the data is coming to Server, but I confused to manage the response or polling from server to Remote GSM RTU, If I choose TCP, I need to put a remote IP address, wich, public GSM RTU or private GSM RTU, or what is the other config that doesn´t need the remote IP address?

Thanks for your response and time.

[rsepulve]

Hi Mikhail,
What should be the right configuration in communicator for Modbus TCP protocol?
Thanks.

[rsepulve]

Hi Pieter,
Can you explain how to connect remote communicator to Server and configure the data variables?.
In remote communicator I´ve puted Server, remote public IP and Port.
But how have I to create and configure a new connection in Local Server?

Thanks.

[rsepulve]

Hi Mikhail,
Thanks for the information, but my problem is IP addressing.
For server no problem,Use a public IP and Nat the 502 TCP port to internal IP address. But, what IP addres I have to put in coomunication settings dor slave devie? Private or Public of remote GSM RTU?

Thanks.

[Author]

Posts